Wollongong Tree Removal & Pruning Guidelines
Tree Permits, Declared Trees, Exemptions & Development Approval Requirements
Do you need Wollongong City Council approval before removing or pruning a tree?
The answer depends on the tree, the property, the proposed work, and whether it’s connected to development.
Under Chapter E17 of the Wollongong DCP, declared trees and vegetation generally can’t be removed, pruned or injured without either a Council Permit or development consent, unless an exemption applies. This guide explains the main pathways for private-property tree removal and pruning across the Wollongong LGA.

This page covers:
- Tree Removal Permits
- Tree Pruning Permits
- Declared Trees
- Exempt Tree Species
- Dead & Dying Trees
- Dangerous Trees
- Emergency Work
- Development Applications
- Arborist Reports
- Major Root Pruning
- Heritage & Habitat Vegetation
- 10/50 Clearing
Do You Need a Permit to Remove a Tree?
Often, yes.
Chapter E17 provides that a declared tree or vegetation can’t be removed, cleared or pruned without either a Permit granted by Council or development consent, unless an exemption applies.
For standalone tree removal or pruning on non-rural land, not connected to new development, the usual pathway is a Permit Application. Where the work forms part of development requiring consent, the pathway changes.
What Is a Declared Tree?
A declared tree under Chapter E17 is one that is:
5 metres or more in height, OR 300mm or more in diameter measured at ground level.
Either threshold is sufficient on its own.
Chapter E17 also declares certain other vegetation, specified native vegetation, threatened-species habitat, heritage-associated vegetation, and vegetation within particular riparian areas. Approval requirements aren’t determined by trunk size alone; the location and ecological or heritage status of the vegetation can matter just as much.
When Is a Removal Permit Required?
Generally, where all of the following apply:
- the tree is declared;
- the property is on non-rural land;
- the work isn’t part of development requiring consent; and
- no exemption applies.
If you’re uncertain which pathway your proposed work falls under, it’s worth checking before the tree comes down.
Do You Need Approval to Prune a Tree?
Potentially, Wollongong’s controls apply to regulated pruning and injury of declared trees and vegetation, not just removal.
Chapter E17 is specific on one point: pruning major structural roots or anchor roots is subject to a Permit. This matters wherever proposed works involve driveway excavation, retaining walls, trenching, drainage, service installation or footing excavation near established trees, root work can affect a tree’s stability and health even where the canopy is never touched.
When Does Removal Require a Development Application?
A standalone tree permit isn’t meant to facilitate development, Chapter E17 states this explicitly: “Permits are not suitable as a means to facilitate development.”
Where tree removal or pruning is associated with building work or development that itself requires a DA, the tree impacts go through the development approval pathway instead. This covers new dwellings, extensions, driveways, garages, pools, secondary dwellings, retaining walls, subdivision, commercial development and infrastructure works.
The DA must be supported by a compliant Arborist Report.
Does Every Removal Application Need an Arborist Report?
No. Council may require additional supporting information, one type being an Arborist’s Report, most useful where removal is sought because of poor health, structural defects, decay, cavities, instability, significant deadwood, root damage, tree-related structural damage, or development impacts.
Chapter E17 identifies Level 5 Horticulture/Arboriculture, or equivalent, as part of the qualification requirements for the arborist preparing that report.
Are Dead or Dying Trees Exempt?
No: this is one of the most important Wollongong rules to know.
Chapter E17 states plainly: “A Permit is also required for any dead or dying tree.” A tree shouldn’t be removed simply because it appears dead, declining or structurally compromised. Where there’s no immediate emergency, get the condition properly assessed and confirm the right pathway before work proceeds.
What About Dangerous Trees or Emergency Work?
Chapter E17 exempts make-safe work where there’s an immediate threat to people or property, during or within 48 hours of a severe weather event, with a follow-up requirement to lodge a Permit Application or DA within 72 hours for any further removal or pruning.
This isn’t a general exemption for any tree that seems unsafe. For non-immediate defects, decay or structural concerns, get an assessment before work begins.
What Trees Are Exempt?
Chapter E17’s Exempt Tree Species List includes Camphor Laurel, Cocos/Queen Palm, Liquidambar, Privet, Radiata Pine, Rubber Tree, Umbrella Tree, Poplar, Willow, Box Elder, Coral Tree and Oleander, among others in the full Appendix 1.
Being an exempt species doesn’t mean no other restriction applies, the exemption doesn’t cover vegetation associated with threatened or endangered ecological communities, habitat for native or threatened fauna, heritage items or heritage conservation areas, or a tree required to be retained under a development consent or other covenant.
Are There Other Exemptions Besides Species?
Yes, separate from the species list, Chapter E17 exempts particular circumstances or authorised work:
- Qualifying 10/50 clearing
- Authorised bushfire hazard-reduction work
- Certain emergency works
- Work by statutory authorities
- Trees already approved for removal under an existing consent
- Some complying development situations
The specific circumstances should always be checked before relying on one of these.
Trees Near a Creek, Watercourse or Riparian Area
Controls become more complex where vegetation sits close to a watercourse or mapped ecological area. Chapter E17 declares vegetation within specified riparian areas, and specifically vegetation within 40 metres of the top bank of a creek, river, watercourse, wetland, stream or other aquatic habitat, as part of its protected vegetation framework.
Other environmental or biodiversity legislation can also apply depending on the site, for these properties, tree size alone shouldn’t be used to assume an exemption.
What If the Tree Is on Heritage Land?
Additional controls apply where a tree or vegetation is associated with a heritage item or heritage area. Chapter E17 includes heritage-associated vegetation among its declared vegetation, identifies circumstances where development consent may be required, and excludes heritage-associated vegetation from some exemptions.
If a tree is on or near a heritage-listed property, confirm the planning position before arranging removal or major pruning.
What If the Tree Is Required to Be Retained Under a DA?
A standard tree permit can’t override an existing development consent condition requiring a tree to be retained, Chapter E17 is explicit that permits cannot approve removal of a tree required to be retained under a development consent. A modification of the consent may be needed instead.
This matters for owners, builders and developers dealing with older approvals.
Tree Protection & Development Assessment: the Short Version
Where existing trees sit on a development site, Council weighs whether they should be retained, can be removed, or require changes to the building or driveway layout, supported by a compliant Arborist Report. Where a tree is to be retained, Chapter E17 requires a Tree Protection Zone, kept clear of buildings, footings, excavation, retaining walls, material storage, services, level changes and hard surfaces, with AQF Level 5 Arborist certification required before construction, during construction, and at completion.
This guide covers the essentials; for the full detail on assessment scope, TPZ/SRZ methodology and the three-stage certification process:
What Information Should You Send Us?
For tree removal or health matters
photos of the tree, property address, a brief description of the concern, and any Council correspondence.
For development
survey, site plans, architectural drawings, proposed driveway or excavation details, and Council correspondence.
We’ll confirm the likely service, Tree Removal Report, Tree Health & Safety Assessment, Development Arborist Report, AIA, Tree Protection Plan, Root Investigation, or Project Arborist.
Wollongong Tree Approval Pathway: Step by Step
- 01Is the tree declared? Check height, trunk diameter, vegetation type and site constraints.
- 02Does an exemption apply? Check species exemptions and other work-based exemptions.
- 03Is the work connected with development? If yes, the DA or development consent pathway likely applies.
- 04Is Council asking for additional evidence? An Arborist Report may be required.
- 05Is there an immediate emergency? Different provisions apply to genuine emergency make-safe work.
- 06Don’t remove the tree until the correct pathway is confirmed.
Official Council Source
Wollongong City Council, Wollongong DCP 2009, Chapter E17: Preservation and Management of Trees and Vegetation
The version referenced throughout this site is the amendment in force from 1 July 2023.
Used for declared-tree definitions, approval pathways, exemptions, Arborist Report requirements, emergency provisions and development tree controls.
Need Help With a Wollongong Tree Permit or Arborist Report?
Send us photos of the tree and your address, and we’ll confirm the right Council pathway and provide a fixed quote.
Get a Free Quote 0494 077 630